A safe gerbil wheel has a solid running surface with no rungs, spokes, or mesh, and it’s at least 8 inches (20 cm) across. A diameter of 10 to 12 inches (25 to 30 cm) is better, because it keeps the back straight. Avoid wire wheels, ball wheels, and any wheel with gaps that can trap a foot or tail.
Size
- Minimum: 8 inches (20 cm) across.
- Preferred: 10 to 12 inches (25 to 30 cm).
- Too small: a wheel that’s too small makes the gerbil run with its back arched upward. Standard hamster wheels, about 6.5 inches across, are too small.
A solid running surface
Gerbils need a surface they can run on without catching a foot. Avoid wire rungs, spokes, mesh, and open gaps. These can trap legs and tails, and they can cause broken bones and bumblefoot, a painful sore on the foot. Mesh doesn’t give better grip. It injures feet and tails.
Watch for gaps and pinch points
- Avoid “scissor” designs, where spokes or a cross-bar pass close to the stand.
- Avoid wheels with a gap between the wheel and the back plate or stand. A tail can get trapped there.
- Prefer a closed back with a single-side mount, or a stand with no moving parts near the running surface.
- The wheel should spin freely and quietly.
Materials
- Metal resists chewing. Cork and untreated wood are safe to gnaw but do get chewed, so check them for damage.
- Plastic gets chewed, so check plastic wheels often and remove them when they’re damaged.
Saucer and ball wheels
- Saucer (“flying saucer”) wheels are debated. The angled running position may strain the spine, so treat them as a supplement rather than the main wheel.
- Ball (exercise) wheels aren’t recommended for gerbils. They have poor ventilation, can cause stress, and lead to collisions.
Examples to look up
The Silent Runner, the Wodent Wheel, and Niteangel’s wooden wheels are examples to look up. Sizes and designs differ between models, so check the diameter and running surface on the current listing before you buy.
How many wheels
- Use one large wheel for every two or three gerbils.
- If gerbils squabble over the wheel, add a second one.
Placement
- Put the wheel on a solid base, such as a tile or a platform.
- Keep deep bedding from building up around the wheel, since it can jam or tip the wheel.
Check it regularly
- Check the wheel weekly for wobbles, cracks, and chew damage.
- Remove a cracked or chewed wheel straight away, especially if it has sharp edges.
- Tail injuries need a vet, so don’t leave one untreated.
For the rest of the setup, see what size tank a gerbil needs. For more on how gerbils move, see gerbil facts.